Festo CMMP-AS-C5-3A-M0 Motor Controller

Features

• On sub-base type of mounting
• Screw-clamped type of mounting
• 2200G product weight
• 7-segment display display
• RCM trademark approval
• C UL us listed (OL) approval
• To EU EMC Directive cE mark (see declaration of conformity)
• To EC Machinery Directive cE mark (see declaration of conformity)
• In accordance with EU RoHS Directive cE mark (see declaration of conformity)
• To UK instructions for EMC cE marking (see declaration of conformity)
• To UK regulations for machines cE marking (see declaration of conformity)
• To UK RoHS instructions cE marking (see declaration of conformity)
• German Technical Control Board (TÜV) Rheinland 01/205/5262.02/19 certificate issuing authority
• TÜV Rheinland UK Ltd. 01/205U/5262.00/22 certificate issuing authority
• 0 - 90% relative air humidity
• IP10 degree of protection
• IP20 degree of protection
• 2 pollution degree
• RoHS-compliant note on materials
• VDMA24364 zone III lABS (PWIS) conformity
• Single-phase phases of nominal operating voltage
• 230V nominal operating voltage aC
• +/- 10 % permissible voltage fluctuations
• 100V input voltage range aC
• 230V input voltage range aC
• 50HZ mains frequency
• 60HZ mains frequency
• 4A nominal current
• 6A nominal current
• Yes active pFC
• Integrated mains filter
• 320V max. intermediate circuit voltage dC
• 60OHM brake resistance
• 2.8KVA pulse power, brake resistance
• 24V nominal voltage for logic power supply dC
• ± 20 % permissible range for logic voltage
• 0.65A current consumption of logic power supply without clamping brake
• 3x 0 - 270 V output voltage class aC
• 5A nominal output current
• 5A nominal current per phase, effective
• 10A peak current per phase, effective
• 5S max. peak current duration
• 1000D46 controller nominal output
• 2000D46 maximum output
• 0HZ output frequency
• 1000HZ output frequency
• Parameterisation and commissioning parameterisation interface
• USB parameterisation interface
• Ethernet parameterisation interface
• CANopen fieldbus link
• Modbus/TCP fieldbus link
• DS301/DSP402 communication profile
• I/O coupling process interfacing
• For 256 position sets process interfacing
• 1MBS max. fieldbus transmission rate
• Plugs bus connection
• 9-pin bus connection
• Sub-D bus connection
• Resolution 16384 ppr encoder interface output, features
• Actual value feedback via encoder signals in speed control mode. encoder interface output, function
• Setpoint specification for downstream slave drive. encoder interface output, function
• 3-phase encoder signals encoder interface input, features
• EnDat encoder interface input, features
• HIPERFACE encoder interface input, features
• RS422 encoder interface input, features
• SINCOS encoder interface input, features
• Setpoint speed value as encoder signal encoder interface input, function
• Specifies the speed of the slave drive in synchronous mode. encoder interface input, function
• 10 number of digital logic inputs
• Galvanically isolated features of logic input
• Freely configurable features of logic input
• 8V working range of logic input
• 30V working range of logic input
• 5 number of digital logic outputs 24 v dC
• Galvanically isolated features of digital logic outputs
• Freely configurable in some cases features of digital logic outputs
• 100MA max. current digital logic outputs
• 2 number of analogue setpoint inputs
• Differential inputs features of setpoint inputs
• Configurable for speed features of setpoint inputs
• Configurable for current features of setpoint inputs
• ± 10 V working range setpoint input
• 20KOH impedance of setpoint input
• 2 number of analogue monitor outputs
• ± 10 V working range of monitor outputs
• 9BIT resolution of monitor outputs
• Short-circuit proof features of monitor outputs
• Safe torque off (STO) safety function
• Safe Stop 1 (SS1) safety function
• Safe torque off (STO)/SIL 3/SILCL 3 safety integrity level (SIL)
• Safe Torque Off (STO)/category 4, performance level e performance level (PL)
• 97% diagnostic coverage
• 99.17% sFF safe failure fraction
• 1 hardware fault tolerance
• 20JHR proof test interval
• 0GC ambient temperature to 40GC ambient temperature
• -25GC to 70GC storage temperature