Festo CMSX-P-S-C-U-F1-D-50-C Positioner

Features

• Digital, electropneumatic positioner design
• Double-acting mode of operation
• Safety position - pneumatic outlets closed design characteristics
• Optional mounting position
• With accessories type of mounting
• Potentiometer functional principle of measuring system
• 0DEG sensing range
• 100DEG sensing range
• 7-segment display
• LCD display display
• With backlighting display
• Via display and keys setting options
• 0.5% size of dead zone
• 10% size of dead zone
• 0.3MPA operating pressure
• 0.8MPA operating pressure
• 3BAR operating pressure
• 8BAR operating pressure
• 43.5PSI operating pressure
• 116PSI operating pressure
• Compressed air to ISO 8573-1:2010 [7:4:4] operating medium
• Lubricated operation not possible note on operating and pilot medium
• 50L2 standard nominal flow rate
• 24V nominal operating voltage dC
• 21.6V operational voltage range dC
• 26.4V operational voltage range dC
• 600MA max. current consumption
• For operating voltage connections reverse polarity protection
• 0 - 10 V digital input, signal range
• 0 - 20 mA digital input, signal range
• 4 - 20 mA digital input, signal range
• 0 - 24 mA analogue inputs, max. dynamic range
• 0 - 11 V analogue inputs, max. dynamic range
• 0.5% analogue inputs, linearity error at 25 °C
• 0.02YUP analogue inputs, temperature coefficient
• 16 bit analogue inputs, resolution
• Yes analog inputs, overload protection
• No analogue inputs, electrical isolation
• 4 - 20 mA digital output, signal range
• 600OHM analogue outputs, max. load impedance
• 0.5% analogue outputs, linearity error at 25°C
• 0.02YUP analogue outputs, temperature coefficient
• 12 bit analogue outputs, resolution
• Yes analogue outputs, reverse polarity protection
• Yes analog outputs, short circuit current rating
• Yes analog outputs, overload protection
• No analogue outputs, galvanic isolation
• To IEC 61131-2, type 3 characteristic for inputs
• PNP switching input
• NPN switching input
• Yes digital inputs, reverse polarity protection
• Yes, via optocoupler digital inputs, electrical isolation
• Yes digital outputs, reverse polarity protection
• 3 x PNP or 3 x NPN, switchable switching output
• 100 mA digital outputs, output current
• Yes digital outputs, short circuit current rating
• Yes digital outputs, overload protection
• Yes, via optocoupler digital outputs, electrical isolation
• 3x digital output electrical connection 1, function
• Analogue output electrical connection 1, function
• Analogue input electrical connection 1, function
• Digital input electrical connection 1, function
• Power supply electrical connection 1, function
• Load power supply electrical connection 1, function
• Terminal strip electrical connection 1, connection type
• Screw terminal electrical connection 1, connector system
• 13 electrical connection 1, number of connections/cores
• 0.6NM electrical connection 1, tightening torque
• 1.5I2 electrical connection 1, conductor cross section
• M20 x 1.5 for electrical connection 1 cable fitting
• 7 - 13 mm for electrical connection 1 permissible cable diameter
• 30 m for electrical connection 1 max. cable length
• 5 - 95% relative air humidity
• Non-condensing relative air humidity
• IP65 degree of protection
• 2 - Moderate corrosion stress corrosion resistance class cRC
• Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 shock resistance
• As per EN 60068-2-29 shock resistance
• Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 vibration resistance
• As per EN 60068-2-6 vibration resistance
• 3 pollution degree
• RCM trademark approval
• To EU EMC Directive cE mark (see declaration of conformity)
• In accordance with EU RoHS Directive cE mark (see declaration of conformity)
• To UK instructions for EMC cE marking (see declaration of conformity)
• To UK RoHS instructions cE marking (see declaration of conformity)
• PC-reinforced material housing
• PC material screen
• Wrought aluminium alloy, anodised material base plate
• High-alloy stainless steel material shaft
• High-alloy stainless steel material coupling
• High-alloy stainless steel material screws
• NBR material seals
• PA material cable gland
• PA material blanking plug
• VDMA24364-B2-L lABS (PWIS) conformity
• RoHS-compliant note on materials
• 970G product weight
• 190 mm x 105 mm x 130 mm dimensions (W x l x h)
• -5GC ambient temperature to 60GC ambient temperature
• -20GC to 60GC storage temperature
• Pneumatic connection g1/8