Festo CPX-CMAX-C1-1 Axis Controller

Axis controller that allows for simple, functional sequences to be realized.

$901.88
Part Numbers
  • CPX-CMAX-C1-1
  • 548932
Highlights...

Features

  • 50 x 107 x 55 mm dimensions (W x L x H)
  • Record mode modes of operation
  • Direct operation modes of operation
  • Module-orientated diagnostics diagnosis
  • Via local 7-segment display diagnosis
  • 8 max. number of modules
  • Force control regulator function
  • 7-segment display display
  • Power load status displays
  • Display/Error axis X status displays
  • MC Axis X status displays
  • Module status status displays
  • Internal electronic fuse for operating voltage fuse protection (short circuit)
  • Internal electronic fuse for load voltage fuse protection (short circuit)
  • 18V operational voltage range DC
  • 30V operational voltage range DC
  • 20V load voltage range DC
  • 30V load voltage range DC
  • 24V nominal load voltage DC
  • 24V nominal operating voltage DC
  • 10MS power failure bridging
  • 200MA current consumption at nominal operating voltage
  • 2.5A permissible load current
  • VDMA24364-B2-L LABS (PWIS) conformity
  • 5 to 95% relative air humidity
  • Non-condensing relative air humidity
  • IP65 degree of protection
  • To IEC 60529 degree of protection
  • 240G product weight
  • 1 axes per string
  • 1 number of axis strings
  • 30m max. cable length
  • Socket electrical connection control interface
  • M9 electrical connection control interface
  • 5-pin electrical connection control interface
  • Digital control-Interface
  • CAN bus with Festo protocol control-Interface
  • Integrated terminating resistor control-Interface
  • RoHS-compliant note on materials
  • PA-reinforced material housing
  • -5°C ambient temperature to 50°C ambient temperature

The Festo CPX-CMAX-C1-1 is an axis controller that offers free choice in position and force control - directly actuated or selected from one of 128 configurable position sets. The configurable record sequencing function enables simple functional sequences to be realized in the axis controller. The auto-identification function identifies each participant with its device data on the controller. Additionally, the actuation of a brake or clamping unit (via a proportional directional control valve) is also included, as well as up to 8 modules. The modules can be operated in parallel or independently of each other.