Festo CPX-CTEL-4-M12-5POL Electrical Interface

Features

• I-Port protocol
• (incl. interlinking block) dimensions (W x l x h)
• 50 x 107 x 55 mm dimensions (W x l x h)
• 110G product weight
• IP65 degree of protection
• IP67 degree of protection
• 1 - Low corrosion stress corrosion resistance class cRC
• (when installed) corrosion resistance class cRC
• 20 m max. cable length
• VDMA24364-B2-L lABS (PWIS) conformity
• RoHS-compliant note on materials
• PA-reinforced material housing
• PC material housing
• - I-Port status/diagnostics lED display
• Module status lED display
• Load supply status lED display
• System supply status lED display
• Communication fault diagnosis
• Module short circuit diagnosis
• Module-orientated diagnostics diagnosis
• Undervoltage diagnosis
• DIL switch operator controls
• 32AD max. address volume, inputs
• 32AD max. address volume, outputs
• Diagnostic behaviour parameterisation
• Fail-safe per channel parameterisation
• Forcing per channel parameterisation
• Idle mode per channel parameterisation
• Module parameters parameterisation
• Tool-change mode parameterisation
• 1 ms per 1 byte of user data internal cycle time
• Tool-change mode additional functions
• 4x socket electrical connection
• 5-pin electrical connection
• A-coded electrical connection
• M12 electrical connection
• 18V operational voltage range dC
• 30V operational voltage range dC
• 24V nominal operating voltage dC
• Typ. 65 mA intern power consumption nominal operating voltage
• 10MS power failure bridging
• 4 x 1.6 A max. total output current per channel
• 4 x 1.6 A max. power supply per channel
• No isolation channel - channel
• Yes, with intermediate air supply isolation channel - internal bus
• 4 number of device interfaces
• -5GC ambient temperature to 50GC ambient temperature
• -20GC to 70GC storage temperature