Festo CPX-E-CEC-M1-EP Controller

Features

• 75.9 mm x 82.5 mm x 124.3 mm dimensions (W x l x h)
• 18.9MM grid dimension
• With H-rail type of mounting
• 10 max. number of modules
• 288G product weight
• Vertical mounting position
• Horizontal mounting position
• -5GC ambient temperature
• 50GC ambient temperature
• -5 - 60°C for vertical installation note on ambient temperature
• 95 % relative air humidity
• Non-condensing relative air humidity
• IP20 degree of protection
• 0 - No corrosion stress corrosion resistance class cRC
• Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 vibration resistance
• Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 shock resistance
• PELV protection against direct and indirect contact
• VDMA24364 zone III lABS (PWIS) conformity
• To EU EMC Directive cE mark (see declaration of conformity)
• In accordance with EU RoHS Directive cE mark (see declaration of conformity)
• To UK instructions for EMC cE marking (see declaration of conformity)
• To UK RoHS instructions cE marking (see declaration of conformity)
• KC-EMV kC mark
• RCM trademark approval
• C UL us listed (OL) approval
• UL E239998 certificate issuing authority
• RoHS-compliant note on materials
• PA material housing
• Force mode diagnostics via lED
• Module status diagnostics via lED
• Network status diagnostics via lED
• Network status, engineering port 1 diagnostics via lED
• Network status, engineering port 2 diagnostics via lED
• EtherCAT® network status diagnostics via lED
• Network status, port 1 diagnostics via lED
• Network status, port 2 diagnostics via lED
• Run diagnostics via lED
• Power supply, electronics/sensors diagnostics via lED
• Load power supply diagnostics via lED
• System fault diagnostics via lED
• DIL switch for RUN/STOP operator controls
• Rotary switch for address setting operator controls
• Optional: CDSB operator unit operator controls
• DHCP iP address setting
• Via CODESYS iP address setting
• Optional: via operator unit CDSB iP address setting
• Ethernet fieldbus interface
• ACD (Address Conflict Detection) field bus, protocol
• DLR (Device Level Ring) field bus, protocol
• EtherNet/IP field bus, protocol
• EtherNet/IP QoS field bus, protocol
• EtherNet/IP Quickconnect field bus, protocol
• SNMP field bus, protocol
• Bus connection incoming/outgoing fieldbus interface, function
• 2x socket field bus, connection type
• RJ45 field bus, connection system
• 995789 fieldbus interface, connection pattern
• 8 field bus, connection pattern
• Yes field bus interface, electrical isolation
• 100 Mbit/s field bus interface, transmission rate
• Ethernet fieldbus interface 2, type
• CoE fieldbus interface 2, protocol
• EoE fieldbus interface 2, protocol
• EtherCAT® fieldbus interface 2, protocol
• FoE fieldbus interface 2, protocol
• Outgoing bus connection fieldbus interface 2, function
• Socket fieldbus interface 2, connection type
• RJ45 fieldbus interface 2, connection technology
• 995789 fieldbus interface 2, connection pattern
• 8 fieldbus interface 2, number of pins/wires
• Yes fieldbus interface 2, galvanic isolation
• 100 Mbit/s fieldbus interface 2, transmission rate
• 2x socket ethernet interface, connection type
• EasyIP ethernet interface, protocol
• Modbus® TCP ethernet interface, protocol
• OPC UA ethernet interface, protocol
• TCP/IP ethernet interface, protocol
• Diagnostics ethernet interface, function
• Switch ethernet interface, function
• RJ45 ethernet interface, connection system
• 995789 ethernet interface, connection pattern
• 8 ethernet interface, number of pins/wires
• 10 Mbit/s ethernet interface, transmission rate
• 100 Mbit/s ethernet interface, transmission rate
• 64AD max. address volume, inputs
• 512AD fieldbus interface, max. address volume for inputs
• 64AD max. address volume, outputs
• 512AD fieldbus interface, max. address volume for outputs
• Diagnostic memory system parameters
• Fail-safe response system parameters
• System start system parameters
• Channel alarms bundling module parameters
• Undervoltage diagnostics module parameters
• Channel alarms for undervoltage module parameters
• Process value representation of analogue modules module parameters
• Control unit CDSB configuration support
• CODESYS V3 configuration support
• CoDeSys V3 with SoftMotion additional functions
• 512 MB RAM cPU data
• Dual Core 766 MHz cPU data
• Micro SD <= 32 GB storage medium
• USB memory stick <= 32 GB storage medium
• Electronics and sensors power supply, function
• Terminal strip power supply, connection type
• > 4 A and UL 2x terminal strip for power supply power supply, note on connection type
• Spring-loaded terminal power supply, connection system
• 995847 power supply, connection pattern
• 4 power supply, number of pins/wires
• 24V nominal dC operating voltage, electronics/sensors
• ± 25% permissible voltage fluctuations for electronics/sensors
• 0.2I2 power supply, conductor diameter
• 1.5I2 power supply, conductor diameter
• 0.2 - 2.5 mm² for flexible conductors without wire end sleeves power supply, note on conductor diameter
• 8A max. power supply
• Typically 150 mA intrinsic current consumption at nominal operating voltage for electronics/sensors
• 20MS power failure bridging
• 24 V sensor supply against 0 V sensor supply reverse polarity protection
• USB 2.0 uSB-interface
• CODESYS provided by Festo programming software
• 100 MB user program program memory
• Approx. 200 µs/1 k instruction processing time
• And others function modules
• Read CPX-E module diagnostics function modules
• CPX-E diagnostic status function modules
• Copy CPX-E diagnostic trace function modules
• 3WCH buffering time real-time clock
• 120 kB retentive data flag
• CODESYS variable concept flag
• Yes isolation channel - internal bus
• -20GC to 70GC storage temperature