Festo CPX-FB23-24 Bus Node

Bus node series designed to handle communication between the electrical terminal and CC-Link bus node. View other configurations.

$597.38
Part Numbers
  • CPX-FB23-24
  • 526176
Highlights...

Features

  • CC-Link protocol
  • (incl. interlinking block) dimensions (W x l x h)
  • 50 x 107 x 50 mm dimensions (W x l x h)
  • 115G product weight
  • IP65 degree of protection
  • IP67 degree of protection
  • 1 - Low corrosion stress corrosion resistance class cRC
  • VDMA24364-B2-L lABS (PWIS) conformity
  • PA-reinforced material housing
  • PC material housing
  • M: Modify, parameterisation lED display, product-specific
  • PL: Load supply lED display, product-specific
  • PS: Electronics supply, sensor supply lED display, product-specific
  • SF: System fault lED display, product-specific
  • Error: Communication error lED display, bus-specific
  • RD: Receive data lED display, bus-specific
  • Run: Communication status lED display, bus-specific
  • SD: Send data lED display, bus-specific
  • Channel-oriented and module-oriented diagnostics device-specific diagnostics
  • Undervoltage of modules device-specific diagnostics
  • Diagnostic memory device-specific diagnostics
  • DIL switch operator controls
  • Sub-D socket, 9-pin field bus interface
  • Sub-D plug connector, for self-assembly field bus interface
  • Screw terminal strip, IP20 field bus interface
  • 14AD max. address volume, inputs
  • 64AD max. address volume, inputs
  • 32AD max. address volume, inputs
  • 14 bytes on Rx (F23) note on inputs
  • 32 bytes on RWr (F23) note on inputs
  • 64 bytes on Rx, RWr (F24) note on inputs
  • 14AD max. address volume, outputs
  • 64AD max. address volume, outputs
  • 32AD max. address volume, outputs
  • 14 bytes with Ry (F23) note on outputs
  • 32 bytes with RWw (F23) note on outputs
  • 64 bytes on Ry, RWw (F24) note on outputs
  • Diagnostic behaviour parameterisation
  • Fail-safe response parameterisation
  • Forcing of channels parameterisation
  • Signal setup parameterisation
  • System parameter parameterisation
  • 156 ... 10000 kbit/s baud rate
  • System status can be mapped using process data additional functions
  • Additional diagnostic interface for operator units additional functions
  • 18V operational voltage range dC
  • 30V operational voltage range dC
  • 24V nominal operating voltage dC
  • Typ. 70 mA intern power consumption nominal operating voltage
  • -5GC ambient temperature to 50GC ambient temperature
  • -20GC to 70GC storage temperature
View other configurations.