Festo DAPS-0015-090-RS3-F03-CR Semi-rotary Drive

Features

• 15 size of valve actuator
• F03 flange hole pattern
• 90DEG swivel angle
• 10.2MM shaft connection depth
• No cushioning cushioning
• Optional mounting position
• Single-acting mode of operation
• Scotch yoke system design
• Without position detection
• Closes to the right closing direction
• 991266 symbol
• Up to SIL 2 High Demand mode safety integrity level (SIL)
• To SIL 2 Low Demand mode safety integrity level (SIL)
• 0.42MPA supply pressure for spring strength
• 4.2BAR supply pressure for spring strength
• 0.42MPA operating pressure
• 0.84MPA operating pressure
• 4.2BAR operating pressure
• 8.4BAR operating pressure
• 0.56MPA nominal operating pressure
• 5.6BAR nominal operating pressure
• To EU Explosion Protection Directive (ATEX) cE mark (see declaration of conformity)
• To UK EX instructions cE marking (see declaration of conformity)
• German Technical Control Board North (TÜV Nord) 212170801 certificate issuing authority
• II 2G aTEX category gas
• II 2D aTEX category dust
• Ex h IIC T6...T3 Gb X explosion ignition protection type for gas
• Ex h IIIC T85°C...T200°C Db X explosion ignition protection type for dust
• -20°C <= Ta <= +60°C explosion ambient temperature
• Compressed air to ISO 8573-1:2010 [7:4:4] operating medium
• Lubricated operation possible (in which case lubricated operation will always be required) note on operating and pilot medium
• 3 - high corrosion stress corrosion resistance class cRC
• VDMA24364-B1/B2-L lABS (PWIS) conformity
• -20GC ambient temperature
• 80GC ambient temperature
• 17.6NM torque at nominal operating pressure and 0° swivel angle
• 9.3NM torque at nominal operating pressure and 50° swivel angle
• 13.8NM torque at nominal operating pressure and 90° swivel angle
• 7.5NM spring return torque at 0° swivel angle
• 5.6NM spring return torque at 50° swivel angle
• 11.3NM spring return torque at 90° swivel angle
• 3 spring strength
• 0.6L air consumption at 0.6 mPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0°
• 1600G product weight
• T9 shaft connection
• RoHS-compliant note on materials
• High-alloy stainless steel material cover
• 1.4408 material number cover
• FPM material seals
• NBR material seals
• PUR material seals
• High-alloy stainless steel material housing
• 1.4408 material number housing
• High-alloy stainless steel material screws
• High-alloy stainless steel material shaft
• 1.4301 material number shaft
• Pneumatic connection g1/8