Festo DAPS-0030-090-RS4-F0507-T4 Semi-rotary Drive

Features

• 30 size of valve actuator
• F05 flange hole pattern
• F07 flange hole pattern
• 90DEG swivel angle
• 81DEG end-position adjustment range at nominal swivel angle
• 91DEG end-position adjustment range at nominal swivel angle
• 16.5MM shaft connection depth
• One end position optionally adjustable note on end-position adjusting range
• ISO 5211 fitting connection conforms to standard
• No cushioning cushioning
• Optional mounting position
• Single-acting mode of operation
• Scotch yoke system design
• Without position detection
• Closes to the right closing direction
• 991266 symbol
• VDI/VDE 3845 (NAMUR) valve connection conforms to standard
• To SIL 2 Low Demand mode safety integrity level (SIL)
• 0.56MPA supply pressure for spring strength
• 5.6BAR supply pressure for spring strength
• 0.56MPA operating pressure
• 0.84MPA operating pressure
• 5.6BAR operating pressure
• 8.4BAR operating pressure
• 0.56MPA nominal operating pressure
• 1HZ max. swivel frequency at 0.6 mPa (6 bar, 87 psi)
• To EU Explosion Protection Directive (ATEX) cE mark (see declaration of conformity)
• To UK EX instructions cE marking (see declaration of conformity)
• German Technical Control Board North (TÜV Nord) 212170801 certificate issuing authority
• II 2G aTEX category gas
• II 2D aTEX category dust
• Ex h IIC T6...T3 Gb X explosion ignition protection type for gas
• Ex h IIIC T85°C...T200°C Db X explosion ignition protection type for dust
• -20°C <= Ta <= +150°C explosion ambient temperature
• Compressed air to ISO 8573-1:2010 [7:4:4] operating medium
• Lubricated operation possible (in which case lubricated operation will always be required) note on operating and pilot medium
• 3 - high corrosion stress corrosion resistance class cRC
• VDMA24364 zone III lABS (PWIS) conformity
• -20GC ambient temperature
• 150GC ambient temperature
• 30NM torque at nominal operating pressure and 0° swivel angle
• 15NM torque at nominal operating pressure and 50° swivel angle
• 20NM torque at nominal operating pressure and 90° swivel angle
• The operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling. note on torque
• 20NM spring return torque at 0° swivel angle
• 15NM spring return torque at 50° swivel angle
• 30NM spring return torque at 90° swivel angle
• 4 spring strength
• 1.19L air consumption at 0.6 mPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0°
• 1950G product weight
• T14 shaft connection
• RoHS-compliant note on materials
• Wrought aluminium alloy material cover
• FPM material seals
• PTFE reinforced material seals
• Wrought aluminium alloy material housing
• High-alloy steel material screws
• High-alloy steel material shaft
• 1.4305 material number shaft
• -1DEG to 9DEG end-position adjustment range at 0°
• Pneumatic connection g1/8