Festo DAPS-0180-090-RS3-F0710-MW Semi-rotary Drive

Features

• 180 size of valve actuator
• F07 flange hole pattern
• F10 flange hole pattern
• 92DEG swivel angle
• 24.3MM shaft connection depth
• One end position optionally adjustable note on end-position adjusting range
• ISO 5211 fitting connection conforms to standard
• No cushioning cushioning
• Optional mounting position
• Single-acting mode of operation
• Scotch yoke system design
• Without position detection
• Closes to the right closing direction
• 991266 symbol
• VDI/VDE 3845 (NAMUR) valve connection conforms to standard
• Up to SIL 2 High Demand mode safety integrity level (SIL)
• To SIL 2 Low Demand mode safety integrity level (SIL)
• 0.42MPA supply pressure for spring strength
• 4.2BAR supply pressure for spring strength
• 0.42MPA operating pressure
• 0.84MPA operating pressure
• 4.2BAR operating pressure
• 8.4BAR operating pressure
• 0.56MPA nominal operating pressure
• 5.6BAR nominal operating pressure
• To EU Explosion Protection Directive (ATEX) cE mark (see declaration of conformity)
• To UK EX instructions cE marking (see declaration of conformity)
• German Technical Control Board North (TÜV Nord) 212170801 certificate issuing authority
• II 2G aTEX category gas
• II 2D aTEX category dust
• Ex h IIC T6...T3 Gb X explosion ignition protection type for gas
• Ex h IIIC T85°C...T200°C Db X explosion ignition protection type for dust
• -50°C <= Ta <= +60°C explosion ambient temperature
• Compressed air to ISO 8573-1:2010 [7:4:4] operating medium
• Lubricated operation possible (in which case lubricated operation will always be required) note on operating and pilot medium
• 2 - Moderate corrosion stress corrosion resistance class cRC
• VDMA24364-B1/B2-L lABS (PWIS) conformity
• -20GC ambient temperature
• 80GC ambient temperature
• 210NM torque at nominal operating pressure and 0° swivel angle
• 112.5NM torque at nominal operating pressure and 50° swivel angle
• 165NM torque at nominal operating pressure and 90° swivel angle
• 90NM spring return torque at 0° swivel angle
• 67.5NM spring return torque at 50° swivel angle
• 135NM spring return torque at 90° swivel angle
• 3 spring strength
• 7L air consumption at 0.6 mPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0°
• 11700G product weight
• T22 shaft connection
• RoHS-compliant note on materials
• Wrought aluminium alloy material cover
• FPM material seals
• NBR material seals
• PUR material seals
• Wrought aluminium alloy material housing
• High-alloy steel material screws
• High-alloy steel material shaft
• 1.4305 material number shaft
• Pneumatic connection g1/8