Festo DFM-6-20-P-A-GF Guided Drive

Features

• 10MM distance from centre of gravity of load to yoke plate xs
• 20MM stroke
• 6 mm piston diameter
• Yoke operating mode, drive unit
• Elastic cushioning rings/plates at both ends cushioning
• Optional mounting position
• Plain-bearing guide guide
• Guidance design
• Via proximity switch position detection
• 991737 symbol
• 0.2MPA operating pressure
• 0.8MPA operating pressure
• 2BAR operating pressure
• 8BAR operating pressure
• 1.3M/S max. speed
• Double-acting mode of operation
• Compressed air to ISO 8573-1:2010 [7:4:4] operating medium
• Lubricated operation possible (in which case lubricated operation will always be required) note on operating and pilot medium
• 1 - Low corrosion stress corrosion resistance class cRC
• VDMA24364-B1/B2-L lABS (PWIS) conformity
• Class 7 according to ISO 14644-1 cleanroom class
• 0.012NM impact energy in end positions
• 0.006NM max. permissible torque load mx as a function of stroke
• 0.5N max. effective load dependent upon stroke at defined distance xs
• 13N theoretical force at 0.6 mPa (6 bar, 87 psi), return stroke
• 17N theoretical force at 0.6 mPa (6 bar, 87 psi), advance stroke
• 0.1DEG torsional backlash
• 13G moving mass
• 45G product weight
• RoHS-compliant note on materials
• High-alloy stainless steel material cover
• NBR material seals
• HNBR material dynamic seals
• Anodised wrought aluminium alloy material end plate
• High-alloy stainless steel material guide rod
• Anodised wrought aluminium alloy material housing
• High-alloy stainless steel material piston rod
• -10GC ambient temperature to 60GC ambient temperature
• Pneumatic connection m3