Festo DPDM-Q-6-5-S-PA Compact Cylinder

Features

• 5MM stroke
• 6 mm piston diameter
• Elastic cushioning rings/plates at both ends cushioning
• Optional mounting position
• Pushing mode of operation
• Single-acting mode of operation
• Piston design
• Piston rod design
• Profile barrel design
• Via proximity switch position detection
• 991732 symbol
• Piston rod at one end variants
• Guide rod with yoke protection against torque/guide
• 0.25MPA operating pressure
• 0.8MPA operating pressure
• 2.5BAR operating pressure
• 8BAR operating pressure
• Compressed air to ISO 8573-1:2010 [7:4:4] operating medium
• Lubricated operation possible (in which case lubricated operation will always be required) note on operating and pilot medium
• 1 - Low corrosion stress corrosion resistance class cRC
• VDMA24364-B2-L lABS (PWIS) conformity
• Class 6 according to ISO 14644-1 cleanroom class
• 13N theoretical force at 0.6 mPa (6 bar, 87 psi)
• 13N theoretical force at 0.6 mPa (6 bar, 87 psi), advance stroke
• 7.5G moving mass for 0 mm stroke
• 0.9G additional moving mass per 10 mm stroke
• 25.5G basic weight for 0 mm stroke
• 6.3G additional weight per 10 mm stroke
• Either: type of mounting
• With through-hole type of mounting
• Via female thread type of mounting
• RoHS-compliant note on materials
• Wrought aluminium alloy material cover
• NBR material seals
• TPE-U(PU) material seals
• Anodised wrought aluminium alloy material housing
• High-alloy stainless steel material piston rod
• -10GC ambient temperature to 80GC ambient temperature
• Pneumatic connection m5