Festo ELGS-BS-KF-60-500-12P-ST-M-H1-PLK-AA Spindle Axis Unit

Features

• 500MM working stroke
• 60 size
• 0MM stroke reserve
• 12MM spindle diameter
• 12Y13 spindle pitch
• Optional mounting position
• Recirculating ball bearing guide guide
• Electromechanical linear axis design
• With ball screw design
• With integrated drive design
• Stepper motor type of motor
• Ball screw drive spindle type
• 997292 symbol
• Motor encoder position detection
• Via proximity switch position detection
• Positive fixed stop block referencing
• Negative fixed stop block referencing
• Absolute single-turn encoder rotor position sensor
• Magnetic rotor position sensor, encoder measuring principle
• Switch-off for excessive temperature temperature monitoring
• Integrated precise CMOS temperature sensor with analogue output temperature monitoring
• User interface additional functions
• Integrated end-position sensing additional functions
• LED display
• LED ready status indication
• 5MS2 max. acceleration
• 0.25M/S max. speed
• ±0.01 mm repetition accuracy
• Configurable features of digital logic outputs
• Not galvanically isolated features of digital logic outputs
• 100% duty cycle
• B insulation protection class
• 100MA max. current digital logic outputs
• 5300A max. current consumption
• 0.3A max. current consumption, logic
• 24V nominal voltage dC
• 5.3A nominal current
• IO-Link parameterisation interface
• User interface parameterisation interface
• 16BIT rotor position transducer resolution
• +/- 15% permissible voltage fluctuations
• Plugs power supply, connection type
• M12x1, T-coded according to EN 61076-2-111 power supply, connection system
• 4 power supply, number of pins/wires
• 995989 power supply, connection pattern
• RCM trademark approval
• KC-EMV kC mark
• To EU EMC Directive cE mark (see declaration of conformity)
• In accordance with EU RoHS Directive cE mark (see declaration of conformity)
• To UK instructions for EMC cE marking (see declaration of conformity)
• To UK RoHS instructions cE marking (see declaration of conformity)
• Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 vibration resistance
• Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 shock resistance
• VDMA24364 zone III lABS (PWIS) conformity
• Class 7 according to ISO 14644-1 cleanroom class
• 0 - 90% relative air humidity
• IP40 degree of protection
• III protection class
• 0GC ambient temperature
• 50GC ambient temperature
• Power must be reduced by 2% per K at ambient temperatures above 30°C. note on ambient temperature
• 441000Y12 2nd moment of area iy
• 542000Y12 2nd moment of area iz
• 3641N max. force fy
• 3641N max. force fz
• 600N max. force fy total axis
• 1800N max. force fz total axis
• 13400N fy at theoretical life value of 100 km (only guide consideration)
• 13400N fz at theoretical life value of 100 km (only guide consideration)
• 29.1NM max. moment mx
• 31.8NM max. moment my
• 31.8NM max. moment mz
• 29.1NM max. moment mx total axis
• 31.8NM max. moment my total axis
• 31.8NM max. moment mz total axis
• 107NM mx at theoretical life value of 100 km (only guide consideration)
• 117NM my at theoretical life value of 100 km (only guide consideration)
• 117NM mz at theoretical life value of 100 km (only guide consideration)
• 200N max. feed force fx
• 20KG reference value effective load, horizontal
• 13KG reference value effective load, vertical
• 29800Y12 torsional mass moment of inertia it
• 12Y13 feed constant
• 5000KM reference service life
• Life-time lubrication maintenance interval
• 525G moving mass
• 5412G product weight
• 0.05% of the axis length, max. 0.5 mm dynamic deflection (moving load)
• 0.1% of the axis length static deflection (load in standstill)
• 2 number of digital logic outputs 24 v dC
• 2 number of digital logic inputs
• Based on IEC 61131-2, type 1 specification logic input
• 24V working range of logic input
• Yes iO-Link, sIO-Mode support
• Configurable features of logic input
• Not galvanically isolated features of logic input
• Device V 1.1 iO-Link, protocol version
• COM3 (230.4 kBaud) iO-Link, communication mode
• A iO-Link, port class
• 1 iO-Link, number of ports
• 2 bytes iO-Link, process data length oUT
• Move in 1 bit iO-Link, process data content oUT
• Move out 1 bit iO-Link, process data content oUT
• Quit Error 1 bit iO-Link, process data content oUT
• Move intermediate 1 bit iO-Link, process data content oUT
• 2 bytes iO-Link, process data length iN
• State In 1 bit iO-Link, process data content iN
• State Out 1 bit iO-Link, process data content iN
• State Move 1 bit iO-Link, process data content iN
• State Device 1 bit iO-Link, process data content iN
• State Intermediate 1 bit iO-Link, process data content iN
• 32-bit force iO-Link, service data iN
• 32-bit position iO-Link, service data iN
• 32-bit speed iO-Link, service data iN
• 1 ms iO-Link, min. cycle time
• 500KB iO-Link, data storage required
• 15 m outputs max. cable length
• 15 m inputs max. cable length
• 20 m with IO-Link® operation max. cable length
• PNP (positive switching) switching logic for outputs
• PNP (positive switching) switching logic for inputs
• Plugs iO-Link, connection technology
• Plug logic interface, connection type
• M12x1, A-coded according to EN 61076-2-101 logic interface, connection technology
• 8 logic interface, number of pins/wires
• 992264 logic interface, plug pattern
• Via female thread type of mounting
• Via centring sleeve and pin type of mounting
• With accessories type of mounting
• Painted die cast aluminium material end cap
• Anodised wrought aluminium alloy material profile
• RoHS-compliant note on materials
• High-alloy stainless steel material cover tape
• Painted die cast aluminium material drive cover
• Steel material guide slide
• Steel material guide rail
• Die-cast aluminium material slide
• Steel material spindle nut
• Steel material spindle
• -20GC to 60GC storage temperature