Festo EMME-AS-80-SK-LS-AMXB Servo Motor

Features

• 0 - 90% relative air humidity
• IEC 60034 conforms to standard
• F insulation protection class
• S1 rating class as per eN 60034-1
• IP21 degree of protection
• DIN 6885 featherkey shaft type
• A 6 x 6 x 22 featherkey shaft type
• Plug electrical connector system
• RoHS-compliant note on materials
• 0 - No corrosion stress corrosion resistance class cRC
• VDMA24364 zone III lABS (PWIS) conformity
• RCM trademark approval
• C UL us - Recognized (OL) approval
• To EU EMC Directive cE mark (see declaration of conformity)
• To EU Low Voltage Directive cE mark (see declaration of conformity)
• In accordance with EU RoHS Directive cE mark (see declaration of conformity)
• To UK instructions for EMC cE marking (see declaration of conformity)
• To UK RoHS instructions cE marking (see declaration of conformity)
• To UK regulations for electrical equipment cE marking (see declaration of conformity)
• 360V nominal operating voltage dC
• 360V nominal voltage dC
• Star inside type of winding switch
• 3 number of pole pairs
• 2.8NM standstill torque
• 2.4NM nominal torque
• 11.2NM peak torque
• 3000PMI nominal rotary speed
• 4690PMI max. rotational speed
• 750W nominal power rating of motor
• 3.1A continuous stall current
• 2.6A nominal motor current
• 12.4A peak current
• 0.923NMA motor constant
• 54.3YUR voltage constant, phase-to-phase
• 4.6OHM phase-phase winding resistance
• 9.46C14 phase-phase winding inductance
• 1.68KGC total mass moment of inertia of output
• 3700G product weight
• 70N permissible axial shaft load
• 350N permissible radial shaft load
• Absolute multi-turn safety encoder rotor position sensor
• HIPERFACE® rotor position encoder interface
• Optical rotor position sensor, encoder measuring principle
• 128 rotor pos. enc., sin/cosin p/r
• 15BIT rotor pos. encoder, typ. res.
• 20YAM rot. pos. enc., typ. ang. acc.
• 4.5NM brake holding torque
• 24V operating voltage dC for brake
• 12W power consumption, brake
• 0.222KGC mass moment of inertia of brake
• 5 million idle actuations (without friction work!) switching cycles holding brake
• SIL 2, rotor position sensor safety integrity level (SIL), subcomponent
• SILCL 2, rotor position sensor safety integrity level (SIL), subcomponent
• Category 3, performance level d, rotor position encoder performance level, subcomponent
• 1.3 x 10E-8, rotor position sensor pFHd, subcomponent
• 20 years, rotor position sensor duration of use tm, subcomponent
• 797 years, holding brake mean time to failure (MTTF), subcomponent
• 874 years, rotor position sensor mean time to dangerous failure (MTTFd), subcomponent
• ENEFF (CN) / Class 2 energy efficiency
• -10GC ambient temperature to 40GC ambient temperature
• -20GC to 70GC storage temperature