Festo HPV-22-60-A Feed Separator

Features

• 60MM stroke
• 22 mm piston diameter
• 0.3MM max. replacement accuracy
• 0.05MM max. stem backlash sx
• 0.03MM max. stem backlash sz
• 0.04DEG max. angular gripper jaw backlash ax
• 0.07DEG max. angular gripper jaw backlash ay
• 0.12DEG max. angular gripper jaw backlash az
• Through-hole mounting of external fingers
• No cushioning cushioning
• Optional mounting position
• Double-acting mode of operation
• Twin piston design
• Piston rod design
• Locking mechanism design
• Non-rotating design
• Via proximity switch position detection
• 398.1MS half pulse
• 991914 symbol
• Square guide protection against torque/guide
• 796.1MS cycle time
• Compressed air to ISO 8573-1:2010 [7:4:4] operating medium
• Lubricated operation possible (in which case lubricated operation will always be required) note on operating and pilot medium
• 2 - Moderate corrosion stress corrosion resistance class cRC
• VDMA24364-B2-L lABS (PWIS) conformity
• 180N max. force on finger fz static
• 9NM max. torque mr at finger, static
• 9NM max. torque at finger mx static
• 9NM max. torque at finger my static
• 180N theoretical force at 0.6 mPa (6 bar, 87 psi), return stroke
• 225N theoretical force at 0.6 mPa (6 bar, 87 psi), advance stroke
• 1500G product weight
• 395G max. mass per external gripper finger
• M5 alternative connections
• Either: type of mounting
• Via female thread and centring sleeve type of mounting
• Via through-hole and centring sleeve type of mounting
• 3BAR to 8BAR operating pressure
• 5GC ambient temperature to 60GC ambient temperature
• Pneumatic connection m5