Festo HSP-25-AS-SD Handling Module

Features

• 25 size
• 130MM y stroke
• 170MM y stroke
• 50MM z stroke
• 70MM z stroke
• 25MM z stroke, working stroke
• Shock absorber at both ends cushioning
• Soft characteristic curve cushioning
• Guide rail mounting position
• Vertical mounting position
• Drive shaft design
• Cross guide design
• Force pilot operated motion sequence design
• Via proximity switch position detection
• Cross guide protection against torque/guide
• 1S min. cycle time
• ±0.02 mm repetition accuracy
• Compressed air to ISO 8573-1:2010 [7:-:-] operating medium
• Lubricated operation possible (in which case lubricated operation will always be required) note on operating and pilot medium
• VDMA24364-B2-L lABS (PWIS) conformity
• 5NM max. drive torque at drive shaft
• 50N max. axial force at drive shaft
• 3.2NM max. torque mx dynamic
• 15NM max. torque mx static
• 3.2NM max. torque my dynamic
• 15NM max. torque my static
• 3.2NM max. torque mz dynamic
• 15NM max. torque mz static
• 1.5KG max. effective load
• 120N max. radial force at drive shaft
• 65N theoretical force at 0.6 mPa (6 bar, 87 psi)
• 7400G product weight
• With through-hole mounting of front unit
• With through-hole type of mounting
• Via slot nuts type of mounting
• Wrought aluminium alloy material base plate
• Tempered steel material cross-guide
• Wrought aluminium alloy material side components
• 0GC ambient temperature to 60GC ambient temperature