Festo HSW-10-AP-SD Handling Module

Features

• 9MM working stroke
• 15MM working stroke
• 10 size
• 90/90 mm max. linear stroke with 90° swivel angle
• 80MM z stroke
• 100MM z stroke
• Shock absorber at both ends cushioning
• Soft characteristic curve cushioning
• Optional mounting position
• Linear guide plus ball bearing design
• Semi-rotary drive design
• Force pilot operated motion sequence design
• Via proximity switch position detection
• 0.6S min. cycle time
• +/-0.02 mm repetition accuracy end positions
• Compressed air to ISO 8573-1:2010 [7:-:-] operating medium
• Lubricated operation possible (in which case lubricated operation will always be required) note on operating and pilot medium
• VDMA24364-B2-L lABS (PWIS) conformity
• 0.6NM max. moment mx
• 0.6NM max. moment my
• 0.6NM max. moment mz
• 0.5KG max. effective load
• 30N max. process force in y direction
• 30N theoretical force at 0.6 mPa (6 bar, 87 psi)
• 1350G product weight
• Via through-hole and centring sleeve type of mounting
• High-alloy steel material stops
• Wrought aluminium alloy material cover
• Anodised material cover
• High-alloy steel material spring pressure piece
• Wrought aluminium alloy material base plate
• Anodised material base plate
• Wrought aluminium alloy material retaining bracket
• Anodised material retaining bracket
• Tempered steel material cross-guide
• Case-hardened steel material swivel lever
• Burnished material swivel lever
• Case-hardened steel material slotted guide plate
• Hardened material slotted guide plate
• Wrought aluminium alloy material sensor rail
• Anodised material sensor rail
• Wrought aluminium alloy material bar
• Anodised material bar
• High-alloy steel material setting screw
• 4BAR to 8BAR operating pressure
• 0GC ambient temperature to 60GC ambient temperature
• Pneumatic connection m3