Festo MHJ10-S-2,5-LF Solenoid Valve

Solenoid valve with integrated control electronics for 50l/min flow rate. View other configurations.

$111.75
Part Numbers
  • MHJ10-S-2,5-LF
  • 572080
Highlights...

Features

  • 2/2-way, closed, monostable valve function
  • Electric type of actuation
  • 10MM construction width
  • 50L2 standard nominal flow rate
  • 0.05MPA operating pressure
  • 0.8MPA operating pressure
  • 0.5BAR operating pressure
  • 8BAR operating pressure
  • Poppet valve without spring return design
  • Pneumatic spring type of reset
  • IP55 degree of protection
  • RCM trademark approval
  • To EU EMC Directive cE mark (see declaration of conformity)
  • In accordance with EU RoHS Directive cE mark (see declaration of conformity)
  • To UK instructions for EMC cE marking (see declaration of conformity)
  • To UK RoHS instructions cE marking (see declaration of conformity)
  • 10.5MM grid dimension
  • Fixed power supply must be able to supply at least 1.7 A without voltage drop note on operation
  • Do not operate without flow. note on operation
  • For block mounting with flow, max. ambient temperature 45°C. note on operation
  • Hard sealing principle
  • Optional mounting position
  • None manual override
  • Direct type of piloting
  • Non-reversible flow direction
  • 992259 symbol
  • For operating voltage reverse polarity protection
  • Spark arresting additional functions
  • Holding current reduction with energy recovery additional functions
  • Safety shut-off additional functions
  • 0.5 b value
  • 0.2LSB c value
  • 500HZ max. switching frequency
  • 0.8MS switching time on 0.4 mPa (4 bar, 58 psi) and 24 v in new condition
  • 1MS switching time off 0.4 mPa (4 bar, 58 psi) and 24 v in new condition
  • 0.7MS switching time on 0.05 mPa (0.5 bar, 7.25 psi) and 24 v in new condition
  • 0.9MS switching time off 0.05 mPa (0.5 bar, 7.25 psi) and 24 v in new condition
  • 0.85MS switching time on 0.6 mPa (6 bar, 87 psi) and 24 v in new condition
  • 0.95MS switching time off 0.6 mPa (6 bar, 87 psi) and 24 v in new condition
  • 0.9MS switching time on 0.8 mPa (8 bar, 116 psi) and 24 v in new condition
  • 0.9MS switching time off 0.8 mPa (8 bar, 116 psi) and 24 v in new condition
  • +15%/-25% tolerance switching time off
  • +/-15% tolerance switching time on
  • 21.6V operational voltage range dC
  • 26.4V operational voltage range dC
  • 34KOH input resistance
  • 100% duty cycle
  • 24 V DC: low-current phase 2.0 W, high-current phase 7.0 W characteristic coil data
  • 3V trigger signal voltage range dC
  • 30V trigger signal voltage range dC
  • Linear rise note on input current
  • 0.09-0.44 mA with a trigger signal of 3-15 V note on input current
  • 0.44-15.44 mA with a trigger signal of 15-30 V note on input current
  • +/- 10 % permissible voltage fluctuations
  • Compressed air to ISO 8573-1:2010 [7:4:4] operating medium
  • Lubricated operation not possible note on operating and pilot medium
  • As a function of switching frequency (see graph) restrictions for environmental and media temperature
  • 2 - Moderate corrosion stress corrosion resistance class cRC
  • VDMA24364-B2-L lABS (PWIS) conformity
  • 120GC permissible solenoid surface temperature
  • -5GC media temperature
  • 60GC media temperature
  • -5GC ambient temperature
  • 60GC ambient temperature
  • 0.7NM max. tightening torque for valve mounting
  • 75G product weight
  • 3-wire electrical connection
  • Cable electrical connection
  • 2.5M cable length
  • On sub-base type of mounting
  • RoHS-compliant note on materials
  • HNBR material seals
  • PA-reinforced material housing
  • PPS reinforced material housing
  • PUR material cable sheath
  • Steel material screws
  • -20GC to 50GC storage temperature
  • Pneumatic connection sub-base , port 1
  • Pneumatic connection sub-base , port 2
View other configurations.