Festo MSE6-E2M-5000-FB37-AGD Service Unit

Features

• 6 size
• MSE series
• Horizontal +/-5° mounting position
• 2/2 open, single solenoid valve function
• Mechanical spring type of reset
• 0.35MPA operating pressure
• 1MPA operating pressure
• 3.5BAR operating pressure
• 10BAR operating pressure
• 50.75PSI operating pressure
• 145PSI operating pressure
• 0.25MPA pressure regulation range
• 1MPA pressure regulation range
• 2.5BAR pressure regulation range
• 10BAR pressure regulation range
• 36.25PSI pressure regulation range
• 145PSI pressure regulation range
• 0.03MPA max. pressure hysteresis
• 0.3BAR max. pressure hysteresis
• 4.35PSI max. pressure hysteresis
• 4500L2 standard nominal flow rate
• 100% duty cycle
• 0.1MA max. current consumption, load
• 0.3MA max. current consumption, logic
• RCM trademark approval
• KC-EMV kC mark
• To EU EMC Directive cE mark (see declaration of conformity)
• In accordance with EU RoHS Directive cE mark (see declaration of conformity)
• To UK instructions for EMC cE marking (see declaration of conformity)
• To UK RoHS instructions cE marking (see declaration of conformity)
• Compressed air to ISO 8573-1:2010 [7:4:4] operating medium
• Lubricated operation not possible note on operating and pilot medium
• VDMA24364-B1/B2-L lABS (PWIS) conformity
• 0GC media temperature
• 50GC media temperature
• IP65 degree of protection
• With plug socket degree of protection
• 3300G product weight
• 4-pin electrical connection
• M18 electrical connection
• Plugs electrical connection
• NBR material seals
• Die-cast aluminium material housing
• PA-reinforced material covering
• PA-reinforced material cover
• 2x socket, M12x1, 4-pin, D-coded field bus interface
• 18V operating voltage dC load voltage
• 26.4V operating voltage dC load voltage
• For operating voltage connections reverse polarity protection
• KPa displayable units
• L displayable units
• L/min displayable units
• M3 displayable units
• Mbar displayable units
• Psi displayable units
• Scf displayable units
• Scfm displayable units
• 50L2 start value for flow rate measuring range
• 5000L2 end value for flow rate measuring range
• ± (3% o.m.v. + 0.3% FS) accuracy of flow rate
• 0MPA start value for pressure measuring range
• 0BAR start value for pressure measuring range
• 0PSI start value for pressure measuring range
• 1.4MPA end value for pressure measuring range
• 14BAR end value for pressure measuring range
• 203PSI end value for pressure measuring range
• 3YUQ accuracy in ± % fS
• 0GC ambient temperature to 50GC ambient temperature
• -10GC to 60GC storage temperature
• 18 to 30V operating voltage range DC electronics/sensors
• Pneumatic connection g1/2 , port 1
• Pneumatic connection g1/2 , port 2