Festo NEBA-M12W5-U-10-N-LE4 Connecting Cable

Features

• EN 61076-2-101 conforms to standard
• EN 61984 conforms to standard
• C UL us listed (OL) approval
• The connecting cable connects field devices (sensors, actuators) with controllers. intended use
• UL E253748 certificate issuing authority
• Without inscription label holder cable designation
• 100 frequency of connection
• 260G product weight
• Meets the requirements of IEC 61010-1 and 61010-2-202, in particular for electrically operated valves from Festo. instructions on use
• Only energy-limited circuits with a maximum current of 4 A at a max. open circuit voltage of 30 V DC are permissible for supplying electrically actuated valves from Festo. instructions on use
• Field device side electrical connection 1, function
• Round electrical connection 1, design
• Socket electrical connection 1, connection type
• Angled electrical connection 1, cable outlet
• M12x1, A-coded to EN 61076-2-101 electrical connection 1, connector system
• 5 electrical connection 1, number of connections/cores
• 4 electrical connection 1, used connections/cores
• Screw-type lock with 13 mm hexagon and longitudinal knurl electrical connection 1, type of mounting
• 991861 electrical connection 1, connection pattern
• Pin 1 = BN electrical connection 1, terminal allocation
• Pin 2 = WH electrical connection 1, terminal allocation
• Pin 3 = BU electrical connection 1, terminal allocation
• Pin 4 = BK electrical connection 1, terminal allocation
• None electrical connection 1, display
• Controller side electrical connection 2, function
• Cable electrical connection 2, connection type
• Open end electrical connection 2, connector system
• 4 electrical connection 2, number of connections/cores
• 4 electrical connection 2, used connections/cores
• Pin 1 = BN electrical connection 2, terminal allocation
• Pin 2 = WH electrical connection 2, terminal allocation
• Pin 3 = BU electrical connection 2, terminal allocation
• Pin 4 = BK electrical connection 2, terminal allocation
• None electrical connection 2, display
• 0V operational voltage range dC
• 250V operational voltage range dC
• 0 - 30 V for UL applications note on operational voltage range dC
• 0V operational voltage range aC
• 250V operational voltage range aC
• 0 - 30 V for UL applications note on operational voltage range aC
• 4A current rating at 40° c
• 2.5KV immunity to surge
• 10M cable length
• Suitable for energy chains/robot applications cable characteristic
• Abrasion-resistant cable characteristic
• Low adhesion cable characteristic
• Flame-retardant and self-extinguishing cable characteristic
• Test conditions on request test conditions cable
• Torsional resistance: > 300,000 cycles, ± 270°/0.1 m test conditions cable
• Bending fatigue strength: > 50000 cycles, bending radius 5 mm test conditions cable
• Energy chain: > 5 million cycles, bending radius 28 mm test conditions cable
• Tested at 23 °C notes on test conditions cable
• 14MM bending radius, fixed cable
• 46MM bending radius, moving cable
• 4.5MM cable diameter
• 4 x 0.25 mm² cable structure
• 0.25I2 nominal cross section conductor
• Sheath removed wire ends
• Cut off bluntly wire ends
• IP65 degree of protection
• IP68 degree of protection
• IP69K degree of protection
• In assembled state note on degree of protection
• UV resistant special characteristics
• Hydrolysis-resistant special characteristics
• Resistant to cooling lubricants special characteristics
• Resistant to microbes special characteristics
• Oil resistant special characteristics
• Ozone-resistant special characteristics
• Application areas with direct exposure to outdoor climatic influences Class D1 based on IEC 60654-1 outdoor applications
• -40GC ambient temperature
• 85GC ambient temperature
• -40 - 50 °C for UL applications note on ambient temperature
• Note derating note on ambient temperature
• -20GC ambient temperature with moving cable
• 85GC ambient temperature with moving cable
• -20 - 50 °C for UL applications note on the ambient temperature with flexible cable installation
• -25GC storage temperature
• 55GC storage temperature
• Temporarily during transport in packaging -40 ... 85 °C note on storage temperature
• Max. 93% at 40 °C relative air humidity
• <= 2000 m NHN nominal altitude of use
• II overvoltage category
• To EU Low Voltage Directive cE mark (see declaration of conformity)
• In accordance with EU RoHS Directive cE mark (see declaration of conformity)
• To UK RoHS instructions cE marking (see declaration of conformity)
• To UK regulations for electrical equipment cE marking (see declaration of conformity)
• VDMA24364-B2-L lABS (PWIS) conformity
• Metals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils suitability for the production of li-ion batteries
• Class 4 according to ISO 14644-1 cleanroom class
• CFC-free note on materials
• RoHS-compliant note on materials
• Cadmium-free note on materials
• Free of halogen note on materials
• Free of phosphoric acid ester note on materials
• 3 pollution degree
• 1 - Low corrosion stress corrosion resistance class cRC
• TPE-U(PUR) material cable sheath
• Grey cable sheath colour
• TPE-U(PUR) material housing
• Black housing colour
• Die-cast zinc, nickel-plated material screw-type lock
• FPM material seals
• Gold-plated copper alloy material electrical contact
• PP material insulating sheath