Festo PDAD-100-G1/2 Adsorption Dryer

Features

• Vertical mounting position
• Horizontal mounting position
• Cold regenerating adsorption dryer design
• 992135 symbol
• 9.6W power consumption at 24VDC
• 16D46 power consumption at 230 vAC
• 2 pollution degree
• KC-EMV kC mark
• In accordance with EU Pressure Equipment Directive cE mark (see declaration of conformity)
• To EU EMC Directive cE mark (see declaration of conformity)
• To EU Low Voltage Directive cE mark (see declaration of conformity)
• To UK Pressure Equipment Regulations cE marking (see declaration of conformity)
• To UK instructions for EMC cE marking (see declaration of conformity)
• To UK regulations for electrical equipment cE marking (see declaration of conformity)
• Compressed air to ISO 8573-1:2010 [6:-:4] operating medium
• Lubricated operation not possible note on operating and pilot medium
• No water in liquid form note on operating and pilot medium
• -40GC pressure dew point
• -70GC pressure dewpoint with reduced cross-section
• 2 - Moderate corrosion stress corrosion resistance class cRC
• VDMA24364-B1/B2-L lABS (PWIS) conformity
• Compressed air to ISO 8573-1:2010 [2:1:2] at -70°C air purity class at output
• Compressed air to ISO 8573-1:2010 [2:2:2] at -40°C air purity class at output
• 2GC media temperature
• 50GC media temperature
• IP65 degree of protection
• II protection class
• II overvoltage category
• 47000G product weight
• Power supply AC electrical connection 1, function
• Socket electrical connection 1, connection type
• Plug pattern type C to industry standard, 9.4 mm electrical connection 1, connector system
• 3 electrical connection 1, number of connections/cores
• 2 electrical connection 1, used connections/cores
• Power supply DC electrical connection 2, function
• Socket electrical connection 2, connection type
• Plug pattern type C to industry standard, 9.4 mm electrical connection 2, connector system
• 4 electrical connection 2, number of connections/cores
• 2 electrical connection 2, used connections/cores
• With accessories type of mounting
• RoHS-compliant note on materials
• Wrought aluminium alloy material housing
• 4BAR to 16BAR inlet pressure 1
• 5GC ambient temperature to 50GC ambient temperature
• -20GC to 60GC storage temperature
• Pneumatic connection g1/2 , port 1
• Pneumatic connection g1/2 , port 2