Festo PE-PK-4-SW PE Converter

Features

• EN 60947-5-1 conforms to standard
• 995409 symbol
• To EU Low Voltage Directive cE mark (see declaration of conformity)
• To UK regulations for electrical equipment cE marking (see declaration of conformity)
• Relative pressure measured variable
• Pneumatic/electric pressure transducer measurement method
• 0MPA operating pressure
• 0.025MPA operating pressure
• 0BAR operating pressure
• 0.25BAR operating pressure
• 8BAR max. overload pressure
• Compressed air to ISO 8573-1:2010 [7:4:4] operating medium
• Lubricated operation possible note on operating and pilot medium
• 0GC media temperature
• 60GC media temperature
• Contacting switching output
• Threshold value with fixed hysteresis switching function
• Changeover switch switching element function
• 0.25BAR switch-on point max.
• 0.07BAR switch-off point min.
• 1HZ max. switching frequency
• 100MA min. load current
• 12V operational voltage range aC
• 250V operational voltage range aC
• 12V operational voltage range dC
• 250V operational voltage range dC
• AC-14 utilisation category - inductive load
• DC-13 utilisation category - inductive load
• AC-12 utilisation category - resistive load
• DC-12 utilisation category - resistive load
• 3 connector leads electrical connection
• Open end electrical connection 1, connector system
• 0.5M cable length
• PVC material cable sheath
• Either: type of mounting
• On 1n mounting frame type of mounting
• With through-hole type of mounting
• Optional mounting position
• 40G product weight
• PA-reinforced material housing
• POM material housing
• Steel material housing
• VMQ (silicone) material housing
• Silver material switch contact
• Tin-plated material electrical connection
• Chloroprene rubber material membrane
• Permanently set setting options
• IP67 degree of protection
• 2000KV insulation voltage
• VDMA24364-B1/B2-L lABS (PWIS) conformity
• 3 pollution degree
• 0GC ambient temperature to 60GC ambient temperature
• Pneumatic connection pK-4