Festo SDBT-BSW-1L-PU-W-0.3-N-M12 Proximity Sensor
T series binary position sensor with 3-wire N/O contact, PNP switching output and 0.3m cable. View other configurations.
- SDBT-BSW-1L-PU-W-0.3-N-M12
- 2476855
- SDBT-BSW-1L-PU-W-0.3-N-M12
- By Festo
- FREE Shipping on orders of $1,000 or more
- FREE Lifetime Tech Support
Overview
Features
- For T-slot design
- EN 60947-5-2 based on standard
- 991153 symbol
- RCM trademark approval
- C UL us listed (OL) approval
- To EU EMC Directive cE mark (see declaration of conformity)
- In accordance with EU RoHS Directive cE mark (see declaration of conformity)
- To UK instructions for EMC cE marking (see declaration of conformity)
- To UK RoHS instructions cE marking (see declaration of conformity)
- UV resistant special characteristics
- Oil resistant special characteristics
- Welding field resistant special characteristics
- Resistant to welding spatter special characteristics
- RoHS-compliant note on materials
- Https://www.festo.com/Drive-Sensor-Overview instructions on use
- Position measured variable
- Magneto-resistive measuring principle
- -25GC ambient temperature
- 85GC ambient temperature
- 1M/S max. travel speed
- 0.2MM repetition accuracy
- PNP switching output
- Output signal freezes switching behavior during welding process
- N/O contact switching element function
- 15MS switch-on time
- 25MS switch-off time
- 25HZ max. switching frequency
- 100MA max. output current
- 100MA max. output current using mounting kits
- 2.8W max. switching capacity dC
- 2.8W max. switching capacity dC using mounting kits
- 1.5V voltage drop
- Adapted to MZ, MY, ME coils inductive protective circuit
- 0MA min. load current
- 0.005MA off-state current
- Yes short circuit current rating
- Available overload protection
- 24V rated operational voltage dC
- 10V operational voltage range dC
- 30V operational voltage range dC
- 10 % residual ripple
- For all electrical connections reverse polarity protection
- Cable with plug electrical connection 1, connection type
- M12x1, A-coded to EN 61076-2-101 electrical connection 1, connector system
- 3 electrical connection 1, number of connections/cores
- Screw-type lock electrical connection 1, type of mounting
- 995573 electrical connection 1, connection pattern
- In-line connection outlet orientation
- Brass, nickel-plated and gold-plated material electrical contact
- TPE-U(PU) material connector housing
- Bending strength: to Festo standard test conditions cable
- Test conditions on request test conditions cable
- 0.3M cable length
- Resistant to welding spatter cable characteristic
- Grey cable sheath colour
- PVC, irradiated material cable sheath
- PVC material insulating sheath
- Screw-clamped type of mounting
- Insertable in the slot from above type of mounting
- 0.6NM max. tightening torque
- Optional mounting position
- 23.3G product weight
- Black housing colour
- Epoxy resin material housing
- PA-reinforced material housing
- High-alloy stainless steel material housing
- Nickel-plated brass material union nut
- Yellow LED switching status indication
- Orange LED function reserve indication
- -5GC ambient temperature with moving cable
- 80GC ambient temperature with moving cable
- IP65 degree of protection
- IP68 degree of protection
- Insensitive to alternating magnetic fields (50...60 Hz) < 200 mT immunity to magnetic fields
- Insensitive to MFDC magnetic fields (1000 Hz) < 200 mT immunity to magnetic fields
- Design insensitive to permanent magnetic fields < Bon immunity to magnetic fields
- VDMA24364-B2-L lABS (PWIS) conformity
This product is an accessory for the following products:
Documents
Accessories
Need Help? Call an engineer at 1-802-880-3123
We're open 8:00 am to 5:30 pm ET