Festo SPAU-P10R-W-Q4D-L-PNLK-PNVBA-M12D Pressure Sensor

Features

• 995410 symbol
• RCM trademark approval
• C UL us listed (OL) approval
• To EU EMC Directive cE mark (see declaration of conformity)
• In accordance with EU RoHS Directive cE mark (see declaration of conformity)
• To UK instructions for EMC cE marking (see declaration of conformity)
• To UK RoHS instructions cE marking (see declaration of conformity)
• KC-EMV kC mark
• RoHS-compliant note on materials
• Relative pressure measured variable
• Piezoresistive pressure sensor measurement method
• 0MPA start value for pressure measuring range
• 0BAR start value for pressure measuring range
• 0PSI start value for pressure measuring range
• 1MPA end value for pressure measuring range
• 10BAR end value for pressure measuring range
• 145PSI end value for pressure measuring range
• 15BAR max. overload pressure
• 1.5MPA overload pressure
• 15BAR overload pressure
• 217.5PSI overload pressure
• Compressed air to ISO 8573-1:2010 [7:4:4] operating medium
• Inert gases operating medium
• Lubricated operation possible note on operating and pilot medium
• 0GC media temperature
• 50GC media temperature
• 12BIT resolution aDC
• 1.5YUQ accuracy in ± % fS
• 0.3YUQ repetition accuracy in ± %FS
• 0.05YUP temperature coefficient in ± %FS/K
• 2 x PNP or 2 x NPN, switchable switching output
• Freely programmable switching function
• N/C or N/O contact, switchable switching element function
• 100MA max. output current
• 0 - 10 V analogue output
• 4 - 20 mA analogue output
• 1 - 5 V analogue output
• 3MS rise time
• 500OHM max. load resistance current output
• 10KOH min. load resistance voltage output
• Yes short circuit current rating
• IO-Link® protocol
• Device V 1.1 iO-Link, protocol version
• Smart sensor profile iO-Link, profile
• Binary data channel (BDC) iO-Link, function classes
• Process data variable (PDV) iO-Link, function classes
• Identification iO-Link, function classes
• Diagnostics iO-Link, function classes
• Teach channel iO-Link, function classes
• COM2 (38.4 kBaud) iO-Link, communication mode
• Yes iO-Link, sIO-Mode support
• A iO-Link, port class
• 0 bytes iO-Link, process data length oUT
• 2 bytes iO-Link, process data length iN
• 14 bit PDV (pressure measurement value) iO-Link, process data content iN
• 2 bit BDC (pressure monitoring) iO-Link, process data content iN
• 3 ms iO-Link, min. cycle time
• 500KB iO-Link, data storage required
• 20V operational voltage range dC
• 30V operational voltage range dC
• For all electrical connections reverse polarity protection
• Plugs electrical connection 1, connection type
• M12x1, A-coded to EN 61076-2-101 electrical connection 1, connector system
• 4 electrical connection 1, number of connections/cores
• 995386 electrical connection 1, connection pattern
• Via wall/surface bracket type of mounting
• Optional mounting position
• 65G product weight
• Illuminated LCD display type
• MPa displayable units
• Bar displayable units
• InH2O displayable units
• InHg displayable units
• KPa displayable units
• Kgf/cm² displayable units
• MmHg displayable units
• Psi displayable units
• IO-Link® setting options
• Teach-in setting options
• Via display and keys setting options
• IO-Link protection against tampering
• PIN code protection against tampering
• 0% setting range threshold value
• 100% setting range threshold value
• 0% setting range hysteresis
• 90% setting range hysteresis
• IP65 degree of protection
• IP67 degree of protection
• 2 - Moderate corrosion stress corrosion resistance class cRC
• VDMA24364-B1/B2-L lABS (PWIS) conformity
• 0GC ambient temperature to 50GC ambient temperature
• Pneumatic connection qS-4