Festo SRAP Series Sensor Box

For monitoring the position of quarter turn actuators.

Select your options below…

{{ option.description }}
"{{ option.noLongerAvailable }}" is no longer a valid option. Please choose from the current set of options.
Need help? Call one of our engineers at 1-802-880-3123. We’re open 8:00 am to 5:30 pm ET.
Request pricing below.
${{ calcCost | formatCurrency }} per {{ calcQuantity }} (${{ unitPrice | formatCurrency }} each) per {{ boxQuantity }} (${{ unitPrice | formatCurrency }} each)
Configured Part Number: {{ calcPartNumber }}
Alternate Part Numbers: {{pn}}
{{pn}}
{{ calcAvailability }}
Learn more about this configuration...
Request Quick Quote
Get Business Financing!
Payments as low as ${{monthlyPayments}}/mo
Highlights...

Features

  • 0 to 270-degree adjustment range for angle detection
  • 12 to 20mA idle current
  • 4 to 20mA analogue output
  • 15 to 30VDC operating voltage range
  • 5 to 13mm permissible cable diameter
  • Angular design, any mounting position
  • Magnetic Hall measuring principle
  • +/- 1 degree repetition accuracy of analogue output
  • 50V insulation voltage
  • 0.8kV surge capacity
  • Protected against short circuit and overloading
  • Based on VDI/VDE 3845 (NAMUR) standard

The Festo SRAP Series Sensor Box reports the positioning of quarter turn actuators back to the controller via an analogue 4 to 20mA output signal. The SRAP always supplies a stable signal as there is no contact between the shaft and sensor.