Festo VPCB-6-L-8-G38-10-F-D3-T22 Valve Unit

Fieldbus valve control unit Without switching position sensing. View other configurations.

$3,979.53
Part Numbers
  • VPCB-6-L-8-G38-10-F-D3-T22
  • 5318141
Highlights...

Features

  • 3-way proportional pressure regulator valve function
  • Piston gate valve design
  • With integrated pressure sensors design
  • Direct type of piloting
  • Electric type of actuation
  • Magnetic spring type of reset
  • Non-reversible flow direction
  • Optional mounting position
  • Hard sealing principle
  • 6MM nominal size
  • Yes short circuit current rating
  • LED display type
  • 725L2 standard nominal flow rate
  • 0.4MPA operating pressure
  • 0.8MPA operating pressure
  • 4BAR operating pressure
  • 8BAR operating pressure
  • 15MMS typical lowering speed
  • When the manual exhaust is actuated with cylinder diameter 80 mm, transmission ratio 1:1 and 100 kg load. information on lowering speed
  • Compressed air to ISO 8573-1:2010 [6:4:4] operating medium
  • Lubricated operation not possible note on operating and pilot medium
  • Maximum particle size 5 µm note on operating and pilot medium
  • IP65 degree of protection
  • In assembled state note on degree of protection
  • RCM trademark approval
  • KC-EMV kC mark
  • To EU EMC Directive cE mark (see declaration of conformity)
  • In accordance with EU RoHS Directive cE mark (see declaration of conformity)
  • To UK instructions for EMC cE marking (see declaration of conformity)
  • To UK RoHS instructions cE marking (see declaration of conformity)
  • VDMA24364 zone III lABS (PWIS) conformity
  • RoHS-compliant note on materials
  • Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 vibration resistance
  • Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 shock resistance
  • 1 - Low corrosion stress corrosion resistance class cRC
  • The product is suitable for industrial purposes only. Measures to eliminate radio interference may be required in residential areas. instructions on use
  • 24V nominal operating voltage dC
  • 21.6V operational voltage range dC
  • 26.4V operational voltage range dC
  • 5 % residual ripple
  • 1.2A max. current consumption
  • 120 mA current consumption
  • For operating voltage reverse polarity protection
  • 100% duty cycle
  • 33.5W max. electrical power consumption
  • Display via LED diagnostic function
  • 30 m max. cable length
  • Plugs field bus, connection type
  • M12x1, A-coded according to EN 61076-2-101 field bus, connection system
  • 5 field bus, connection pattern
  • CAN bus with Festo protocol field bus, protocol
  • Socket electrical connection for drive, connection type
  • M12x1, A-coded to EN 61076-2-101 electrical connection for drive, connection technology
  • 8 electrical connection for drive, number of pins/wires
  • Plugs electrical connection for valve, connection type
  • Plug pattern type C to industry standard, 9.4 mm electrical connection for valve, connection technology
  • 2 electrical connection for valve, number of pins/wires
  • Direct mounting via M5 thread type of mounting
  • 1550G product weight
  • Anodised wrought aluminium alloy material housing
  • FPM material seals
  • HNBR material seals
  • NBR material seals
  • 0GC ambient temperature to 50GC ambient temperature
  • Pneumatic connection g3/8 , port 1
  • Pneumatic connection g3/8 , port 2
  • Pneumatic connection g3/8 , port 3
  • Pneumatic connection g1/8 for control component
View other configurations.