$2,339.47
  • VPCF-6-L-8-G38-10-A4-E-EX2
  • 8041715

Overview

Features

  • 3-way proportional flow control valve valve function
  • Piston gate valve design
  • With integrated pressure sensors design
  • Direct type of piloting
  • Electric type of actuation
  • Magnetic spring type of reset
  • 995603 symbol
  • Non-reversible flow direction
  • Optional mounting position
  • Hard sealing principle
  • 6MM nominal size
  • Yes short circuit current rating
  • LED display type
  • 0L2 flow range
  • 1500L2 flow range
  • 0.1MPA operating pressure
  • 1MPA operating pressure
  • 1BAR operating pressure
  • 10BAR operating pressure
  • 30L2 flow rate control range
  • 1500L2 flow rate control range
  • Regulation takes place as of 30 l/min; below this reference value the flow control valve switches to the exhaust position. note on the flow rate control range
  • The accuracy specifications provided are based on a flow rate control range of 75-1500 l/min. note on the flow rate control range
  • 0.5YUQ repetition accuracy in ± %FS
  • 3YUQ absolute accuracy in ± %FS at room temperature
  • 0.8YUQ hysteresis in ± %FS
  • 0GC ambient temperature
  • 50GC ambient temperature
  • 15GC media temperature
  • 35GC media temperature
  • Compressed air to ISO 8573-1:2010 [6:4:4] operating medium
  • Lubricated operation not possible note on operating and pilot medium
  • Maximum particle size 5 µm note on operating and pilot medium
  • IP65 degree of protection
  • In assembled state note on degree of protection
  • RCM trademark approval
  • To EU EMC Directive cE mark (see declaration of conformity)
  • To EU Explosion Protection Directive (ATEX) cE mark (see declaration of conformity)
  • In accordance with EU RoHS Directive cE mark (see declaration of conformity)
  • To UK instructions for EMC cE marking (see declaration of conformity)
  • To UK EX instructions cE marking (see declaration of conformity)
  • To UK RoHS instructions cE marking (see declaration of conformity)
  • II 3G aTEX category gas
  • II 3D aTEX category dust
  • Ex nA IIC T5 X Gc explosion ignition protection type for gas
  • Ex tc IIIC T60°C X Dc explosion ignition protection type for dust
  • 0°C <= Ta <= +50°C explosion ambient temperature
  • VDMA24364-B1/B2-L lABS (PWIS) conformity
  • RoHS-compliant note on materials
  • Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 vibration resistance
  • Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 shock resistance
  • 1 - Low corrosion stress corrosion resistance class cRC
  • 24V nominal operating voltage dC
  • 20.4V operational voltage range dC
  • 30V operational voltage range dC
  • 5 % residual ripple
  • 1.2A max. current consumption
  • 150MA current consumption with no-load outputs
  • PNP switching output
  • PNP switching input
  • 100MA current rating per output
  • For operating voltage reverse polarity protection
  • 100% duty cycle
  • 36W max. electrical power consumption
  • 4 - 20 mA signal range analogue output
  • 4 - 20 mA signal range analogue input
  • Display via LED diagnostic function
  • 8-pin electrical connection
  • A-coded electrical connection
  • M12x1 electrical connection
  • Plugs electrical connection
  • Direct mounting via through-hole type of mounting
  • Direct mounting via thread type of mounting
  • 856G product weight
  • Anodised wrought aluminium alloy material housing
  • FPM material seals
  • HNBR material seals
  • Pneumatic connection g3/8 , port 1
  • Pneumatic connection g3/8 , port 2
  • Pneumatic connection g3/8 , port 3
View other configurations.