Festo VPCF-6-L-8-G38-10-V1-E-EX2 Proportional Flow Control Valve
Proportional flow control valve for 0 to 10bar pressure range with 0 to 10V setpoint. View other configurations.

- VPCF-6-L-8-G38-10-V1-E-EX2
- 8041716
- VPCF-6-L-8-G38-10-V1-E-EX2
- By Festo
- FREE Shipping
Overview
Features
- 3-way proportional flow control valve valve function
- Piston gate valve design
- With integrated pressure sensors design
- Direct type of piloting
- Electric type of actuation
- Magnetic spring type of reset
- 995603 symbol
- Non-reversible flow direction
- Optional mounting position
- Hard sealing principle
- 6MM nominal size
- Yes short circuit current rating
- LED display type
- 0L2 flow range
- 1500L2 flow range
- 0.1MPA operating pressure
- 1MPA operating pressure
- 1BAR operating pressure
- 10BAR operating pressure
- 30L2 flow rate control range
- 1500L2 flow rate control range
- Regulation takes place as of 30 l/min; below this reference value the flow control valve switches to the exhaust position. note on the flow rate control range
- The accuracy specifications provided are based on a flow rate control range of 75-1500 l/min. note on the flow rate control range
- 0.5YUQ repetition accuracy in ± %FS
- 3YUQ absolute accuracy in ± %FS at room temperature
- 0.8YUQ hysteresis in ± %FS
- 0GC ambient temperature
- 50GC ambient temperature
- 15GC media temperature
- 35GC media temperature
- Compressed air to ISO 8573-1:2010 [6:4:4] operating medium
- Lubricated operation not possible note on operating and pilot medium
- Maximum particle size 5 µm note on operating and pilot medium
- IP65 degree of protection
- In assembled state note on degree of protection
- RCM trademark approval
- To EU EMC Directive cE mark (see declaration of conformity)
- To EU Explosion Protection Directive (ATEX) cE mark (see declaration of conformity)
- In accordance with EU RoHS Directive cE mark (see declaration of conformity)
- To UK instructions for EMC cE marking (see declaration of conformity)
- To UK EX instructions cE marking (see declaration of conformity)
- To UK RoHS instructions cE marking (see declaration of conformity)
- II 3G aTEX category gas
- II 3D aTEX category dust
- Ex nA IIC T5 X Gc explosion ignition protection type for gas
- Ex tc IIIC T60°C X Dc explosion ignition protection type for dust
- 0°C <= Ta <= +50°C explosion ambient temperature
- VDMA24364-B1/B2-L lABS (PWIS) conformity
- RoHS-compliant note on materials
- Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 vibration resistance
- Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 shock resistance
- 1 - Low corrosion stress corrosion resistance class cRC
- 24V nominal operating voltage dC
- 20.4V operational voltage range dC
- 30V operational voltage range dC
- 5 % residual ripple
- 1.2A max. current consumption
- 150MA current consumption with no-load outputs
- PNP switching output
- PNP switching input
- 100MA current rating per output
- For operating voltage reverse polarity protection
- 100% duty cycle
- 36W max. electrical power consumption
- 0 - 10 V signal range analogue output
- 0 - 10 V signal range analogue input
- Display via LED diagnostic function
- 8-pin electrical connection
- A-coded electrical connection
- M12x1 electrical connection
- Plugs electrical connection
- Direct mounting via through-hole type of mounting
- Direct mounting via thread type of mounting
- 856G product weight
- Anodised wrought aluminium alloy material housing
- FPM material seals
- HNBR material seals
- Pneumatic connection g3/8 , port 1
- Pneumatic connection g3/8 , port 2
- Pneumatic connection g3/8 , port 3
Documents
Need Help? Call an engineer at 1-802-880-3123
We're open Mo-Th 8am to 5:30pm. Fr 8am to 5pm ET