Festo DAPS-0120-090-RS4-F0710-T4 Semi-rotary Drive

Name: Festo DAPS-0120-090-RS4-F0710-T4 Semi-rotary Drive
Price: 1015.16 USD
Availability: BackOrder

Quarter turn actuators with a Single-acting, pushing function and high breakaway torques generated via a scotch yoke mechanism. View other configurations.

$1,015.16

Part Numbers

DAPS-0120-090-RS4-F0710-T4
8030619

Highlights...

DAPS-0120-090-RS4-F0710-T4
By Festo
FREE Shipping
Usually ships in 5 weeks

Features

120 size of valve actuator
F07 flange hole pattern
F10 flange hole pattern
90DEG swivel angle
81DEG end-position adjustment range at nominal swivel angle
91DEG end-position adjustment range at nominal swivel angle
24.8MM shaft connection depth
One end position optionally adjustable note on end-position adjusting range
ISO 5211 fitting connection conforms to standard
No cushioning cushioning
Optional mounting position
Single-acting mode of operation
Scotch yoke system design
Without position detection
Closes to the right closing direction
991266 symbol
VDI/VDE 3845 (NAMUR) valve connection conforms to standard
To SIL 2 Low Demand mode safety integrity level (SIL)
0.56MPA supply pressure for spring strength
5.6BAR supply pressure for spring strength
0.56MPA operating pressure
0.84MPA operating pressure
5.6BAR operating pressure
8.4BAR operating pressure
0.56MPA nominal operating pressure
1HZ max. swivel frequency at 0.6 mPa (6 bar, 87 psi)
To EU Explosion Protection Directive (ATEX) cE mark (see declaration of conformity)
To UK EX instructions cE marking (see declaration of conformity)
German Technical Control Board North (TÜV Nord) 212170801 certificate issuing authority
II 2G aTEX category gas
II 2D aTEX category dust
Ex h IIC T6...T3 Gb X explosion ignition protection type for gas
Ex h IIIC T85°C...T200°C Db X explosion ignition protection type for dust
-20°C <= Ta <= +150°C explosion ambient temperature
Compressed air to ISO 8573-1:2010 [7:4:4] operating medium
Lubricated operation possible (in which case lubricated operation will always be required) note on operating and pilot medium
3 - high corrosion stress corrosion resistance class cRC
VDMA24364 zone III lABS (PWIS) conformity
-20GC ambient temperature
150GC ambient temperature
120NM torque at nominal operating pressure and 0° swivel angle
60NM torque at nominal operating pressure and 50° swivel angle
80NM torque at nominal operating pressure and 90° swivel angle
The operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling. note on torque
80NM spring return torque at 0° swivel angle
60NM spring return torque at 50° swivel angle
120NM spring return torque at 90° swivel angle
4 spring strength
5.6L air consumption at 0.6 mPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0°
6800G product weight
T22 shaft connection
RoHS-compliant note on materials
Wrought aluminium alloy material cover
FPM material seals
PTFE reinforced material seals
Wrought aluminium alloy material housing
High-alloy steel material screws
High-alloy steel material shaft
1.4305 material number shaft
-1DEG to 9DEG end-position adjustment range at 0°
Pneumatic connection g1/8