Festo CMMP-AS-C10-11A-P3-M3 Motor Controller

Features

• On sub-base type of mounting
• Screw-clamped type of mounting
• 3450G product weight
• 7-segment display display
• RCM trademark approval
• C UL us listed (OL) approval
• To EU EMC Directive cE mark (see declaration of conformity)
• To EC Machinery Directive cE mark (see declaration of conformity)
• To EU Low Voltage Directive cE mark (see declaration of conformity)
• In accordance with EU RoHS Directive cE mark (see declaration of conformity)
• To UK instructions for EMC cE marking (see declaration of conformity)
• To UK regulations for machines cE marking (see declaration of conformity)
• To UK RoHS instructions cE marking (see declaration of conformity)
• To UK regulations for electrical equipment cE marking (see declaration of conformity)
• 0 - 90% relative air humidity
• IP10 degree of protection
• IP20 degree of protection
• 2 pollution degree
• RoHS-compliant note on materials
• VDMA24364 zone III lABS (PWIS) conformity
• 3-phase phases of nominal operating voltage
• 400V nominal operating voltage aC
• +/- 10 % permissible voltage fluctuations
• 50HZ mains frequency
• 60HZ mains frequency
• 11A nominal current
• Integrated mains filter
• 560V max. intermediate circuit voltage dC
• 68OHM brake resistance
• 8.5KVA pulse power, brake resistance
• 24V nominal voltage for logic power supply dC
• ± 20 % permissible range for logic voltage
• 1A current consumption of logic power supply without clamping brake
• 3x 0 - 360 V output voltage class aC
• 10A nominal output current
• 10A nominal current per phase, effective
• 20A peak current per phase, effective
• 5S max. peak current duration
• 6000D46 controller nominal output
• 12000D46 maximum output
• 0HZ output frequency
• 1000HZ output frequency
• Parameterisation and commissioning parameterisation interface
• USB parameterisation interface
• Ethernet parameterisation interface
• CANopen fieldbus link
• DeviceNet fieldbus link
• EtherCAT fieldbus link
• EtherNet/IP fieldbus link
• Modbus/TCP fieldbus link
• PROFINET fieldbus link
• Profibus DP fieldbus link
• DS301/DSP402 communication profile
• FHPP communication profile
• I/O coupling process interfacing
• For 256 position sets process interfacing
• 1MBS max. fieldbus transmission rate
• Plugs bus connection
• 9-pin bus connection
• Sub-D bus connection
• Resolution 16384 ppr encoder interface output, features
• Actual value feedback via encoder signals in speed control mode. encoder interface output, function
• Setpoint specification for downstream slave drive. encoder interface output, function
• 3-phase encoder signals encoder interface input, features
• EnDat encoder interface input, features
• HIPERFACE encoder interface input, features
• RS422 encoder interface input, features
• SINCOS encoder interface input, features
• Setpoint speed value as encoder signal encoder interface input, function
• Specifies the speed of the slave drive in synchronous mode. encoder interface input, function
• 10 number of digital logic inputs
• Galvanically isolated features of logic input
• Freely configurable features of logic input
• 8V working range of logic input
• 30V working range of logic input
• 5 number of digital logic outputs 24 v dC
• Galvanically isolated features of digital logic outputs
• Freely configurable in some cases features of digital logic outputs
• 100MA max. current digital logic outputs
• 2 number of analogue setpoint inputs
• Differential inputs features of setpoint inputs
• Configurable for speed features of setpoint inputs
• Configurable for current features of setpoint inputs
• ± 10 V working range setpoint input
• 20KOH impedance of setpoint input
• 2 number of analogue monitor outputs
• ± 10 V working range of monitor outputs
• 9BIT resolution of monitor outputs
• Short-circuit proof features of monitor outputs
• 0GC ambient temperature to 40GC ambient temperature
• -25GC to 70GC storage temperature